Network-technologies USBV-x Manual do Utilizador

MAN035 Rev Date 2/12/2013 UNIMUX-USBV-xO USB KVM Switch Installation and Operation Manual

NTI UNIMUX SERIES USB KVM SWITCH 6 5. When cascading switches, follow the instruction on page 29 for "Cascading". 6. Connect the AC li

NTI UNIMUX SERIES USB KVM SWITCH 7 Power-Up Sequence • The UNIMUX can be powered at any time. • The CPUs can be powered at any time although if a

NTI UNIMUX SERIES USB KVM SWITCH 8 USING THE UNIMUX USB KVM SWITCH Once the UNIMUX is properly connected, the UNIMUX will enable a connection to be

NTI UNIMUX SERIES USB KVM SWITCH 9 MODES OF OPERATION Basic Command Mode In order to control the UNIMUX with the keyboard connected, Command Mode

NTI UNIMUX SERIES USB KVM SWITCH 10 Broadcast Mode To activate or deactivate Broadcast Mode press <B> while in Command Mode. Broadcast Mod

NTI UNIMUX SERIES USB KVM SWITCH 11 Mice and Trackballs with MACs The UNIMUX can be configured to enable full functionality between mice and trac

NTI UNIMUX SERIES USB KVM SWITCH 12 OSD CONTROL OSD superimposes a menu system on the user’s video screen with a list of all connected CPUs. OSD a

NTI UNIMUX SERIES USB KVM SWITCH 13 User Login Mode User login mode requires a user to login with a user name and password from the list created

NTI UNIMUX SERIES USB KVM SWITCH 14 ADDITIONAL MODES AVAILABLE WITH SECURITY The three modes that follow are only available if the administrator is

NTI UNIMUX SERIES USB KVM SWITCH 15 Save new password. Move to next field to be edited Return to Administration Mode User Name List To enter

i TRADEMARK UNIMUX is a trademark of Network Technologies Inc in the U.S. and other countries COPYRIGHT Copyright © 2000, 2013 by

NTI UNIMUX SERIES USB KVM SWITCH 16 The list below describes the functions available in the Edit User mode: Function: Keystroke: Add

NTI UNIMUX SERIES USB KVM SWITCH 17 Usage Statistics To view the Usage Statistics press <D> from the Administration Mode menu. The Usage St

NTI UNIMUX SERIES USB KVM SWITCH 18 USER ACCESS FUNCTIONS Introduction The OSD menu enables a user to name the CPUs connected to the UNIMUX and co

NTI UNIMUX SERIES USB KVM SWITCH 19 OSD Command Mode (Cont'd) Function: Keystroke: Switch to a selected port Update

NTI UNIMUX SERIES USB KVM SWITCH 20 Note: The scan dwell time set by the user only effects that user and has no effect on other switch users. No

NTI UNIMUX SERIES USB KVM SWITCH 21 Change Settings To enter the Change Settings menu (see Fig. 20) press <Ctrl>+<T> from the Command M

NTI UNIMUX SERIES USB KVM SWITCH 22 Select Ports For Scan To Select Ports For Scanning, press <S> from the Change Settings menu described on

NTI UNIMUX SERIES USB KVM SWITCH 23 A checklist with all the ports numbers preceded by a check box will be displayed in the window. • unchecked box

NTI UNIMUX SERIES USB KVM SWITCH 24 Maintenance Mode To enter Maintenance Mode press <Ctrl>+<M> from the Command Mode menu. Maintenanc

NTI UNIMUX SERIES USB KVM SWITCH 25 Help Mode To enter Help Mode press the <F1> key from the Command Mode menu (on page 17). Help Mode displa

ii TABLE OF CONTENTS INTRODUCTION...

NTI UNIMUX SERIES USB KVM SWITCH 26 RS232 CONTROL (Optional) RS232 enables the UNIMUX to be remotely controlled via RS232. To control the UNIMUX vi

NTI UNIMUX SERIES USB KVM SWITCH 27 Unit Address and Loop Back To allow multiple units to be controlled from a single CPU serial port, the RS232 cont

NTI UNIMUX SERIES USB KVM SWITCH 28 Note: To use this command protocol, the user is required to write a program that will send an entire command str

NTI UNIMUX SERIES USB KVM SWITCH 29 NTI Switch Control Program For Windows 9X, NT, 2000, Vista and 7 The NTI Switch Control Program is an easy and

NTI UNIMUX SERIES USB KVM SWITCH 30 9) Read Connection for Output/User - read what input is connected to the specified output a) Read Connec

NTI UNIMUX SERIES USB KVM SWITCH 31 MOUSE CLICK EQUIVALENTS To emulate a right button click using Apple 1 button mouse, hold down the Command key (

NTI UNIMUX SERIES USB KVM SWITCH 32 Figure 32-

NTI UNIMUX SERIES USB KVM SWITCH 33 CASCADING The UNIMUX-USBV-x USB KVM switch can be cascaded as shown in Fig. 33 below. Single user and mult

NTI UNIMUX SERIES USB KVM SWITCH 34 Figure 34- Cascaded

NTI UNIMUX SERIES USB KVM SWITCH 35 Figure 36- Master to slave c

iii Keyboard-To-Computer Translation...

NTI UNIMUX SERIES USB KVM SWITCH 36 Port Assignments in OSD When the Master powers up with the powered-ON Slave switches connected, you will need to

NTI UNIMUX SERIES USB KVM SWITCH 37 AUDIO SUPPORT (Optional) Models with audio support include 3.5mm stereo jacks for connection to audio sources

NTI UNIMUX SERIES USB KVM SWITCH 38 RS232 CONNECTION CABLES Pinout of RS232 port on UNIMUX The UNIMUX RS232 serial port is a DB-9F (female) connec

NTI UNIMUX SERIES USB KVM SWITCH 39 INDEX administration mode, 14 administrator login, 12 alternate command hot key, 16 Audio support, 37 basic comm

NTI UNIMUX SERIES USB KVM SWITCH 1 INTRODUCTION The UNIMUX-USBV-xO (formerly referred to as KEEMUX-USBV-xU) USB KVM switch (UNIMUX) allows access to

NTI UNIMUX SERIES USB KVM SWITCH 2 MATERIALS Materials supplied with this kit: • NTI UNIMUX-USBV-xO (x=2,4,8,16, or 32 ports) USB KVM Switch • 11

NTI UNIMUX SERIES USB KVM SWITCH 3 FEATURES AND FUNCTIONS 1. CPU Status LEDs- for visual indication of connection be

NTI UNIMUX SERIES USB KVM SWITCH 4 RACKMOUNTING INSTRUCTIONS This NTI switch was designed to be mounted to a rack or to sit on a desktop. It inclu

NTI UNIMUX SERIES USB KVM SWITCH 5 INSTALLATION 1. It is not necessary to turn the CPUs or monitors OFF during this installation. 2. Connect the