Network-technologies CAT5 Manual do Utilizador

MAN024

5 INSTALLATION The Host Adapter The PRIMUX HA Host Adapter is designed to support PS/2, SUN and USB CPUs, as well as serial-controlled servers and

6Installation of a USB CPU Plug the cables of the HA-USB Host Adapter into the back of the CPU after disconnecting the power cord from the CPU. (S

7Installation of a Serial-Controlled Server or Device Plug the cables of the HA-RS Host Adapter into the serial port on a server or other serially-c

8(Rear View)CAT5 Cableto User Station Cable to CPUTerminatingPlug (Supplied) The HA-RS Host Adapter includes with a base for mounting to any desired

9Daisy-Chained Host Adapters Up to 64 Host Adapters can be connected in a daisy-chain to create a series of CPUs that are controlled by a single use

10 The User Station The PRIMUX-UZR User Station can be used with either PS/2 devices or USB devices. NOTE: If the user keyboard connected is

11 Figure 11- Connect extended USB components to the User Station

12 Power Up for the first time Note: The user devices, monitor, and CAT5 cable should already be connected before powering up the User Station. 1

13 USING THE PRIMUX The PRIMUX CAT5 KVM System is designed to enable a user to control as many as 64 PS/2, USB and legacy SUN CPUs (any mixture of

14Setup Host Adapter(s) No initial configuration of the Host Adapter is required for it to be identified by the User Station. Once discovered, i

i TRADEMARK PRIMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2004, 2013 by Ne

15 Change the Default Administrator Password Once the administrator is logged in, it is recommended (for greater security) that the the administ

16 Guidelines for Navigating OSD Menus Throughout this manual, various rules apply for navigating the menus used to control and operate the PRIMUX.

17 Figure 15- PRIMUX-UZR front panel Keypad Control The keypad on the

18Security The PRIMUX CAT5 KVM System is designed with security to prevent unauthorized use of the CPUs connected as determined by the administrator

19User OSD Menus Command Mode In order to control the User Station with the keyboard, Command Mode must be enabled. To enable Command Mode from the

20 Function Keystroke Display first 8 Host Adapters and move selection bar to the first Home Display last 8 Host Adapters and move selection ba

21Settings Menu The Settings Menu provides controls for how the current logged-in user will view and make the best use of the PRIMUX. Note: Chang

22OSD Settings Menu To enter the OSD Settings Menu, press <O> from the Settings Menu. (From the Command Mode menu press <T> - <O&g

23Select Hosts to Scan From the Settings Menu, press <S> for the list of Host Adapters to select for scanning. (From Command Mode press <

24Favorite Hosts From the Settings Menu, press <F> for the list of Host Adapters to select as favorites. (From Command Mode press <T>

ii TABLE OF CONTENTS Introduction...

25 Video Quality Adjustment Video quality adjustment is done automatically to assure the image is as clear as possible. However, due to the dif

26Administrator Controls Administration Menu Note: The Administration menu will only be accessible if the administrator is logged in (page 18) or i

27 System Configuration Menu Press <A> -<S> from the Command Mode menu to display the System Configuration menu.

28Alternate OSD Key This function enables the administrator to assign a key in addition to the <`> (accent/tilde key) to use with <Ctrl>

29 Configure Host Adapters From the Administration Menu, press <H> to display the Configure Host Adapters menu from which the adminstrato

30 To edit the Host Adapter enter the desired parameter values as defined in the chart below: Suggestion: Use the <Tab> key to quickly jump b

31 Function Description Keystroke --- Move selection Bar bar Up arrow or Down arrow --- Select specific user to access the Host Adapter Spaceba

32Configure Users From the Administration Menu, press <U> to display the Configure Users menu from which the adminstrator can select Users t

33Function Description Keystroke Name Modify the name (of the selected User)- opens an edit field to enter a character string- 16 characters max.

34Function Description Keystroke ---- Toggle Specific selection Spacebar Find Locate Host Adapter by name F All Allow user access to all Host A

iiiFavorite Hosts...

35 Select Auto-login User From the User Station Configuration menu, press <A> to bring up the Auto-login User list. (From Command Mode type

36 Firmware Configuration Menu The Firmware Configuration Menu is provided to enable the administrator to update the firmware inside the PRIMUX User

37Save and Restore Configuration To use the Save Configuration or Restore Configuration features you must first have a computer with a terminal em

38 The following error messages may be displayed for the reasons shown: Error Message Reason “Error Saving Configuration” Took too long to connec

39 Select Keyboard Language To enter the Select Keyboard Language menu press <K> from the User Station Configuration menu (from Command Mode

40Network Configuration This screen is only available in Matrix Mode (applicable when used with a PRIMUX Matrix Multi-User KVM Switch)- see page 34

41HA-RS Configuration The HA-RS Serial Host Adapter enables a user to remotely connect to a serial device and control the device using the PRIMUX U

42 Help Menu Press <Ctrl>-<F1> to view a list of information that will help you to navigate the features of the HA-RS host adapter.

43 Programmable Keys A list of <Fx> keys that when used in conjunction with the <Alt> key can be programmed to be used as macro keys to

44 KEYBOARD MAPPING Key Equivalents Using the chart below, find the character needed to be typed on the CPU being accessed, then follow the row acr

ivFigure 12- Connect CAT5 cable to User Station...

45 Figure 45-

46TECHNICAL SPECIFICATIONS Video Compatibility SVGA, XGA, VGA Video Quality Adjustment Automatic, for up to 1000 feet of CAT5 cable Video Couplin

47 INTERCONNECTION CABLE WIRING METHOD The CAT5 connection cable between the remote and local is terminated with RJ45 connectors and must be wired

48 MENU QUICK-FIND KEYSTROKE TABLE Function Source Page Keystroke Sequence Command Mode 19 <Ctrl> + <`> Return to Command Mode 16

49 INDEX add a new user, 33 adding a Host Adapter, 9 Administration menu, 26, 27 administrator login, 18 Administrator rights, 13 Alternate OSD key

1 INTRODUCTION The PRIMUX CAT5 KVM System (PRIMUX) allows the relocation of a VGA monitor, PS/2 or USB keyboard, and mouse from up to 64 PS/2, leg

2Materials Materials Supplied with this kit: Materials Not Supplied,

3 FEATURES AND FUNCTIONS 1. LED Display- for visual indication of which Host Adapter the user is connected to 2. Search Buttons-

4 PREPARATION FOR INSTALLATION • Choose a location for the User Station such that cables from the keyboard, mouse, and monitor will reach it