Network Technologies CAT5 Manual do Utilizador descarregar pdf (Página 33)

To edit the User Station Info use the commands and enter the desired parameter values as defined in the chart below:

Function

Keystroke

Confirmation

Required

Parameter Value

Modify the name N No String, 16 characters max., case

sensitive

Modify the Comment Field C No String, 32 characters max., case

sensitive

Modify the Autologon to select the user to

be automatically logged in at power up

A No None. Brings up Select User menu.

Reset User Station internal data

Default values will be restored.

Use with care, all user configuration

settings will be lost.

R Yes None

Delete all Host Adapters from the segment H Yes None

Delete all users U Yes None

Display the User Station info I No None

Return to Edit Menu X or Esc No None

Select Autologon User

From the Edit User Station menu, press <A> to bring up the Select User Menu. (From Command Mode type <A> - <E> - <S> -

<A>.)

Figure 34- Select user for Autologon

To select which user will be automatically logged in when the User Station is powered up, choose one of the actions listed below:

Function Description Keystroke

Enter Select the user indicated by the selection bar Enter

Info Display info on the selected user I

None Choose not to have any users logged on at power up. This will

bring up the Login screen at power up instead of a user menu.

Exit Return to Edit User Station Menu X or Esc

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Sem comentários

Network Technologies CAT5 Manual do Utilizador Página 33