Network Technologies USBV-x Manual do Utilizador

MAN035 Rev Date 3/5/2007 UNIMUX-USBV-x USB KVM Switch Installation and Operation Manual

NTI UNIMUX SERIES USB KVM SWITCH 6 5. When cascading switches, follow the instruction on page 29 for "Cascading". 6. Connect the AC l

NTI UNIMUX SERIES USB KVM SWITCH 7 Power-Up Sequence • The UNIMUX can be powered at any time. • The CPUs can be powered at any time although if

NTI UNIMUX SERIES USB KVM SWITCH 8 USING THE UNIMUX USB KVM SWITCH Once the UNIMUX is properly connected, the UNIMUX will enable a connection to be

NTI UNIMUX SERIES USB KVM SWITCH 9 MODES OF OPERATION Basic Command Mode In order to control the UNIMUX with the keyboard connected, Command Mod

NTI UNIMUX SERIES USB KVM SWITCH 10 Broadcast Mode To activate Broadcast Mode press <Ctrl> + <B> from the Command Mode menu. Broadcast

NTI UNIMUX SERIES USB KVM SWITCH 11 Mice and Trackballs with MACs The UNIMUX can be configured to enable full functionality between mice and track

NTI UNIMUX SERIES USB KVM SWITCH 12 OSD CONTROL OSD superimposes a menu system on the user’s video screen with a list of all connected CPUs. OSD a

NTI UNIMUX SERIES USB KVM SWITCH 13 User Login Mode User login mode requires a user to login with a user name and password from the list created by

NTI UNIMUX SERIES USB KVM SWITCH 14 Administrator Password To change the administrator password press <C> from the Administration Mode menu.

NTI UNIMUX SERIES USB KVM SWITCH 15 Edit User To enter the Edit User mode press <E> from the User Name List after selecting a user or an emp

i MAN035 Rev Date 3/5/2007 TRADEMARK UNIMUX is a trademark of Network Technologies Inc in the U.S. and other countries COPYRIGHT

NTI UNIMUX SERIES USB KVM SWITCH 16 Alternate Command Hot Key To enable the administrator to assign a key in addition to the <`> (accent key)

NTI UNIMUX SERIES USB KVM SWITCH 17 OSD Command Mode (Cont'd) Function: Keystroke: Selects a specific port Enters Search Mode and ad

NTI UNIMUX SERIES USB KVM SWITCH 18 Scan Mode To activate Scan Mode press <Ctrl> + <S> from the Command Mode menu. When in Scan Mode th

NTI UNIMUX SERIES USB KVM SWITCH 19 Change Settings To enter the Change Settings menu (see Fig. 18) press <Ctrl>+<T> from the Command

NTI UNIMUX SERIES USB KVM SWITCH 20 Select Ports For Scan To Select Ports For Scanning, press <S> from the Change Settings menu described on

NTI UNIMUX SERIES USB KVM SWITCH 21 A check list with all the ports numbers preceded by a check-box will be displayed in the window. • unchecked b

NTI UNIMUX SERIES USB KVM SWITCH 22 Maintenance Mode To enter Maintenance Mode press <Ctrl>+<M> from the Command Mode menu. Maintenanc

NTI UNIMUX SERIES USB KVM SWITCH 23 Help Mode To enter Help Mode press the <F1> key from the Command Mode menu (on page 17). Help Mode displ

NTI UNIMUX SERIES USB KVM SWITCH 24 RS232 CONTROL (Optional) RS232 enables the UNIMUX to be remotely controlled via RS232. To control the UNIMUX

NTI UNIMUX SERIES USB KVM SWITCH 25 Unit Address and Loop Back To allow multiple units to be controlled from a single CPU serial port, the RS232 cont

ii MAN035 Rev Date 3/5/2007 TABLE OF CONTENTS INTRODUCTION...

NTI UNIMUX SERIES USB KVM SWITCH 26 Command Protocol RS232 commands supported by the unit are defined below. All command strings should be terminat

NTI UNIMUX SERIES USB KVM SWITCH 27 Matrix Switcher's Control Program For Windows 9X, NT, AND 2000 The Matrix Switcher's Control Program

NTI UNIMUX SERIES USB KVM SWITCH 28 9) Read Connection for Output/User - read what input is connected to the specified output a) Read Connectio

NTI UNIMUX SERIES USB KVM SWITCH 29 MOUSE CLICK EQUIVALENTS To emulate a right button click using Apple 1 button mouse, hold down the Command key (

NTI UNIMUX SERIES USB KVM SWITCH 30 Figure 30-

NTI UNIMUX SERIES USB KVM SWITCH 31 CASCADING The UNIMUX-USBV-x USB KVM switch can be cascaded as shown in Fig. 31 below. Single user and multi-u

NTI UNIMUX SERIES USB KVM SWITCH 32. Figure 32- Cascaded

NTI UNIMUX SERIES USB KVM SWITCH 33 Figure 33- Master-to-slave device cable connections- sin

NTI UNIMUX SERIES USB KVM SWITCH 34 Limitations ¾ If any switches made prior 9/22/04 are used as slaves, then all switches used as slaves must hav

iii MAN035 Rev Date 3/5/2007 Translation Capabilities ...

NTI UNIMUX SERIES USB KVM SWITCH 1 INTRODUCTION The UNIMUX-USBV-x (formerly referred to as KEEMUX-USBV-xU) USB KVM switch (UNIMUX) allows access to

NTI UNIMUX SERIES USB KVM SWITCH 2 DEFINITIONS • USB Composite Device A USB device that contains multiple endpoints each representing

NTI UNIMUX SERIES USB KVM SWITCH 3 FEATURES AND FUNCTIONS 1. CPU Status LEDs- for visual indication of connection b

NTI UNIMUX SERIES USB KVM SWITCH 4 RACKMOUNTING INSTRUCTIONS This NTI switch was designed to be mounted to a rack or to set on a desktop. It inclu

NTI UNIMUX SERIES USB KVM SWITCH 5 INSTALLATION 1. It is not necessary to turn the CPUs or monitors OFF during this installation. 2. Connect t