Network Technologies 900GV Manual do Utilizador descarregar pdf (Página 27)

Installing the DIGITAL VNswitch 900GV 2-7

How to Install the Module

Task 3: Verify Initial LED Operation

To verify initial LED operation, check the following stages:

If… Then…

This is a new installation Turn on the power to the DIGITAL

MultiSwitch 900.

The module was installed while the

DIGITAL MultiSwitch 900 is

powered up

Seating the module initiates the module’s

power–up sequence.

If the LEDs do not operate as described,

refer to Appendix A, Problem Solving.

For locations of the module’s LEDs, refer

to Figure 2-1.

Stage Description

1 When the module receives power, the module’s Power LED lights and

remains lit.

2 The module runs a self–test.

Note:

The initial self-test takes approximately three minutes to

complete.

3 After the module completes self-test, the Module OK LED lights and

remains lit.

4 The DIGITAL MultiSwitch 900 LCD display shows VNswitch

900GV.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Sem comentários

Network Technologies 900GV Manual do Utilizador Página 27